[oren64]

Thanks for testing, so the problem is with 'My 24 line spacing values' and not "Freedom to advanced fonts control"?

please try this patch:

`My 24 line spacing values`

Spoiler:

<Patch>
patch_name = `My 24 line spacing values` 
patch_enable = `yes`
# patch_group = `Line spacing values alternatives`
#
## This patch changes the values on the line spacing adjustment slider,
## increasing the number of spacing options from 15 to 24, and allowing
## much narrower spacing values to be set.
#
# save r5, initialise loop counter
replace_bytes = 611D98, 71 4B C7 E9 02 23, BD 60 00 25 ED 00
# loop to load 14 vals from new table 4e36bc
replace_bytes = 611D9E, D1 F6 28 ED 5B A3, 20 46 03 A1 29 44
replace_bytes = 611DA4, D3 E9 00 23, D1 F6 26 ED
replace_bytes = 611DA8, 07 F1 80 01 20 46, 08 35 70 2D F7 D1
# jump over new table
replace_bytes = 611DAE, 61 E9, 78 E0
# new table: 14 8-aligned doubles
base_address = 611DB0
replace_bytes = 0000, 1C 23 D1 F6 1E ED 58 A3, 00 00 00 00 00 00 F0 3F
replace_bytes = 0008, D3 E9 00 23 07 F1 80 01, 00 00 00 00 00 00 F0 3F
replace_bytes = 0010, 20 46 61 E9 1A 23 D1 F6, 00 00 00 00 00 00 F0 3F
replace_bytes = 0018, 14 ED 55 A3 D3 E9 00 23, 00 00 00 00 00 00 F0 3F
replace_bytes = 0020, 07 F1 80 01 20 46 61 E9, 00 00 00 00 00 00 F0 3F
replace_bytes = 0028, 18 23 D1 F6 0A ED 61 4B, 00 00 00 00 00 00 F0 3F
replace_bytes = 0030, 07 F1 80 01 4F F0 33 32, 00 00 00 00 00 00 F0 3F
replace_bytes = 0038, 20 46 61 E9 16 23 D1 F6, 00 00 00 00 00 00 F0 3F
replace_bytes = 0040, 00 ED 4D A3 D3 E9 00 23, 00 00 00 00 00 00 F0 3F
replace_bytes = 0048, 07 F1 80 01 20 46 61 E9, 00 00 00 00 00 00 F0 3F
replace_bytes = 0050, 14 23 D1 F6 F6 EC 58 4B, 00 00 00 00 00 00 F0 3F
replace_bytes = 0058, 07 F1 80 01 00 22 20 46, 00 00 00 00 00 00 F0 3F
replace_bytes = 0060, 61 E9 12 23 D1 F6 EC EC, 00 00 00 00 00 00 F0 3F
replace_bytes = 0068, 45 A3 D3 E9 00 23 07 F1, 00 00 00 00 00 00 F0 3F
base_address = 00000000
# initialise loop counter
replace_bytes = 611EA0, D1 F6 A6 EC, 00 BF 00 25
# loop to load 10 vals from old table
replace_bytes = 611E54, 3A A3 D3 E9 00 23, 20 46 1A A1 29 44
replace_bytes = 611E5A, 07 F1 80 01, D1 F6 A4 EC
replace_bytes = 611E5E, 20 46 61 E9 0A 23, 08 35 50 2D F7 D1
# restore r5
replace_bytes = 611EB4, 9E EC, BD 68
# continue at 611F26
#
#
# Replacement value: the number of initial line spacing values to exclude from
# the line spacing slider; minimum 0, maximum 13. E.g. 9 will result in a
# slider with 15 positions, starting from the 10th replace_float value below.
replace_int = 611D9A, 0, 0
#
# 24 replacement line spacing values: change these replace_float values to suit
# your device and preferences:
#
base_address = 611DB0
replace_float = 0000, 1.0, 0.75
replace_float = 0008, 1.0, 0.78
replace_float = 0010, 1.0, 0.8
replace_float = 0018, 1.0, 0.82
replace_float = 0020, 1.0, 0.84
replace_float = 0028, 1.0, 0.86
replace_float = 0030, 1.0, 0.88
replace_float = 0038, 1.0, 0.9
replace_float = 0040, 1.0, 0.92
replace_float = 0048, 1.0, 0.94
replace_float = 0050, 1.0, 0.96
replace_float = 0058, 1.0, 0.98
replace_float = 0060, 1.0, 1.0
replace_float = 0068, 1.0, 1.02
base_address = 611F10
replace_float = 0000, 1.05, 1.05
replace_float = 0008, 1.07, 1.07
replace_float = 0010, 1.1, 1.1
replace_float = 0018, 1.35, 1.15
replace_float = 0020, 1.7, 1.2
replace_float = 0028, 1.8, 1.25
replace_float = 0030, 2.2, 1.3
replace_float = 0038, 2.4, 1.35
replace_float = 0040, 2.6, 1.4
replace_float = 0048, 2.8, 1.5
#
# The first 14 replacement values above should allow the line spacing to be
# adjusted in increments of one pixel when using a medium sized font on a high
# resolution device. If you use a smaller font size and/or a lower resolution
# device you might find that increasing the slider one step at a time doesn't
# always result in a line spacing increase at each step. In that case, you
# might want to use replacement values that are not quite so close together.
#
# For example: (I use these values on my 758x1024 Glo)
#
#  0.7 0.725 0.75 0.775 0.8 0.825 0.85 0.875 0.9 0.925 0.95 0.975 1.0 1.025 ...
#
# or: (these might better suit the 600x800 Touch)
#
#  0.6 0.633 0.667 0.7 0.733 0.767 0.8 0.833 0.867 9.0 9.33 9.67 1.0 1.025 ...
#
</patch>