Afaik you have also to follow steps 9-10 of my previous post in the right order:
1. Nickel, 2. Wlan-setup in Nickel, 3. reboot into debian, 4. goto wifi-config, start it and wait some secs until a message box with the ip-adress appears.
grtz martux
Quote:
Originally Posted by eehmke
Thanks. I patched that value at address 0x80017 and dd'd the image again to the sd card. It kind of works now, but not really good. It responds very sluggish (if at all) to the touchpad. When I tap at the WiFi symbol, I get a black screen with another Wifi symbol at the center. Nothing can be done there. So I cannot activate the WLAN connection to telnet into the device.
|