Here are a few more images of the internals:
https://imgur.com/LrkZWeP
https://imgur.com/gNFO4gj
https://imgur.com/N2wU1N0
Let me see what I have around.
But, with more playing around, I think I managed to get into EDL mode by holding down buttons. If I hold down home and power, let power blink once, then twice, then let go of power while holding home, then press power once, the power button light turns off and I can load the programmer with edl --loader=Loaders/qualcomm/factory/sdm636/000cc0e100000000_7be49b72f9e43372_fhprg_bqx2_peek. bin
The problem now is when I try to run printgpt I get: edl printgpt
Qualcomm Sahara / Firehose Client V3.53 (c) B.Kerler 2018-2021.
main - Trying with no loader given ...
main - Waiting for the device
main - Device detected
main - Mode detected: firehose
firehose - Nop succeeded.
firehose - Chip serial num: 0 (0x0)
firehose -
firehose
firehose - [LIB]: GetStorageInfo command isn't supported.
firehose_client
firehose_client - [LIB]: No --memory option set, we assume "eMMC" as default ..., if it fails, try using "--memory" with "UFS","NAND" or "spinor" instead !
firehose - TargetName=
firehose - MemoryName=eMMC
firehose - Version=
firehose_client - Supported functions:
-----------------
configure,program,firmwarewrite,patch,setbootables toragedrive,ufs,emmc,power,benchmark,read,getstora geinfo,getcrc16digest,getsha256digest,erase,peek,p oke,nop,xml
I have the update.upx -> update.zip with boot.img, etc, but is there anything I can do if GetStorageInfo is not supported?