MobileRead Forums - View Single Post - Noob's guide to debricking through ATK :D

Maslan · 11-09-2012, 05:23 AM

Few days ago I was successful in "debricking" K3 WiFi. Today I wasn't so successful. During flashing of 'kernel.bin' I put the address 0x00000000 instead of the correct 0x00041000. It happened after filling the address (howto - 9) and picking MMDC/SD in the dropdown menu (howto - 10). I didn't notice the address changed back to 0x00000000 after the change in dropdown menu.
(I suggest switch order of 9 and 10 in "K3noobdebrickATK" howto).

My Kindle looks dead or is it still chance? On 'pastebin' I found 'bootloader' and 'kernel' for FW 3.3.
If I found even 'rootfs', could it work again? Do you know where I can find 'rootfs'?
How should I correctly apply the 'rootfs' on my Kindle? Do you have any other suggestions, which help at this point?

11-09-2012, 05:23 AM	#348
Maslan Junior Member Posts: 2 Karma: 10 Join Date: Nov 2012 Location: Czech Device: K3	K3 dead ? Few days ago I was successful in "debricking" K3 WiFi. Today I wasn't so successful. During flashing of 'kernel.bin' I put the address 0x00000000 instead of the correct 0x00041000. It happened after filling the address (howto - 9) and picking MMDC/SD in the dropdown menu (howto - 10). I didn't notice the address changed back to 0x00000000 after the change in dropdown menu. (I suggest switch order of 9 and 10 in "K3noobdebrickATK" howto). My Kindle looks dead or is it still chance? On 'pastebin' I found 'bootloader' and 'kernel' for FW 3.3. If I found even 'rootfs', could it work again? Do you know where I can find 'rootfs'? How should I correctly apply the 'rootfs' on my Kindle? Do you have any other suggestions, which help at this point?