I just finished flashing the device again but it still won't enter into the diagnostics mode. The screen does not change a single bit during the whole process.
Here is the log from the console which seems fine:
D:\fastboot>fastboot flash diags_kernel kt_5.0.0-diags_kernel.img
< waiting for device >
downloading 'diags_kernel'...
OKAY [ 0.261s]
writing 'diags_kernel'...
OKAY [ 0.943s]
finished. total time: 1.207s
D:\fastboot>fastboot flash diags mmcblk0p2.img
< waiting for device >
downloading 'diags'...
OKAY [ 3.392s]
writing 'diags'...
OKAY [ 6.284s]
finished. total time: 9.681s
D:\fastboot>fastboot setvar bootmode diags
< waiting for device >
setting 'bootmode' to 'diags'...
bootmode diags:
finished. total time: 0.014s
D:\fastboot>fastboot reboot
< waiting for device >
rebooting...
finished. total time: 0.004s
D:\fastboot>
|