View Single Post
Old 01-15-2018, 05:04 PM   #2
tshering
Wizard
tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.tshering ought to be getting tired of karma fortunes by now.
 
Posts: 3,441
Karma: 2902061
Join Date: Jun 2012
Device: kobo touch
collect basic information

Let us start with session 1 (we will try to collect some basic information for all models):
[ in the webbrowser ]
press "basic info", and copy then the output to a text file. In my case it looks like this:
Code:
### executed:echo PRODUCT=$PRODUCT, PRODUCT_ID=$PRODUCT_ID, CPU=$CPU, PLATFORM=$PLATFORM,\WIFI_MODULE=$WIFI_MODULE, WIFI_MODULE_PATH=$WIFI_MODULE_PATH\uname=$(uname -a), FW=$(awk -F',' '{print $3}' /mnt/onboard/.kobo/version)

PRODUCT=kraken, PRODUCT_ID=0x4173, CPU=mx50, PLATFORM=mx50-ntx,
WIFI_MODULE=dhd, WIFI_MODULE_PATH=/drivers/mx50-ntx/wifi/dhd.ko
uname=Linux (none) 2.6.35.3-850-gbc67621+ #619 PREEMPT Thu Dec 22 15:29:00 CST 2016 armv7l GNU/Linux, FW=4.7.10413
press "fbset" and copy the output to the text file, make a note that this was made while KSM was running:
Code:
### executed:fbset ### KSM running 
mode "1024x758-0"
	# D: 0.025 MHz, H: 0.022 kHz, V: 0.029 Hz
	geometry 1024 758 1024 1536 16
	timings 40000000 12 76 4 5 12 2
	accel false
	rgba 5/11,6/5,5/0,0/0
endmode
press "read rotate-value" and copy the output to the text file, make a note that this was made while KSM was running:
Code:
### executed:cat /sys/class/graphics/fb0/rotate ### KSM running
0
[on the reader]
select "start nickel" (do not open a book, but stay on the home screen), and after nickel has started
[ in the webbrowser ] (if you use the webinterface over the wifi network, enable wifi in nickel, since KSM had to switch it off temporarily)
repeat "fbset" and "read rotate-value" as before.
Code:
### executed:fbset ### nickel running
mode "758x1024-0"
	# D: 0.025 MHz, H: 0.029 kHz, V: 0.028 Hz
	geometry 758 1024 768 1024 32
	timings 40000000 12 76 4 5 12 2
	accel false
	rgba 8/16,8/8,8/0,8/24
endmode
Code:
### executed:cat /sys/class/graphics/fb0/rotate ### nickel running
3
[ in the webbrowser ] press "ksm power off"


Please, upload the text file to this post. Next time we might address the rotation problem on some models.

Last edited by tshering; 01-19-2018 at 05:55 PM.
tshering is offline   Reply With Quote