Quote:
Originally Posted by guybrushT
Hi All,
Been pointed to this thread by Silver18 in regards to help with replacing the files on a K4NT so that it is reset to factory conditions.
Firstly my Kindle isn't bricked and completely works, it has just had a screensaver hack done to it.
I was wondering if I can copy over the file mmcblk0p1.img (from K4NT 4.0.1 forensic images) to my Kindle in Windows using a normal USB transfer, and then run the following commands in Putty when in Diags mode.
(From Silver18 noobs guide)
dd if=/mnt/us/mmcblk0p1.img of=/dev/mmcblk0p1 bs=4K
followed by
rm /mnt/us/ENABLE_DIAGS
idme -d --bootmode main
reboot
Would that do it? Or are other steps needed?
Thanks
|
You can try it. If it does not work, then use fastboot to flash the matching 4.0.1 kernel. Beware that some have reported problems with the 4.0.1 images, so you may want to try the 4.0.0 images you can download from the second forensic images (hostar's) link in simple debricking first post.
Then you can upgrade to 4.0.1 or newer if you want. In fact, if you leave wireless on, it will probably automatically upgrade to 4.1.0...