Quote:
Originally Posted by readerdm
Hello Domas,
As you found, I have reloaded my Cybook Gen3, which is also based on the Netronix EB100 I think. I'm not sure if the operating system is the same, but you can try my path to see if it helps. THere is a serial port, but it is at 3.3 volts. You will need a 3.3V to RS-232 level translator. THis is a single chip and you can usually buy a little board with one one it. It is powered from the ebook board. With that, you can look at the bootloader stuff, and maybe find out what is wrong. I didn't try the JTAG port yet. THe pinout for both these connectors can be found on the Bookeen forums.
|
You are wrong, they are not the same hardware.
EB100 is really different from EB600.
Domas: you definitly brick your device. Playing with firmware of other brands are generally NOT a good idea, unless you work for this brand (or another one).
I think that you will find no one here that could help about this problem, and even if you got JTAG or anything like this on the device you will not be able to repair the product without very good knowledge of it.