MobileRead Forums - View Single Post

gbm · 10-13-2017, 07:11 PM

1. Turn on your NOOK.
2. At the welcome screen hold down the button on the top right (page turn button) and at the same time slide your finger across the top of the screen from left to right.
3. You should now see a Factory link on the top left of the screen, press this link.
4. On the factory screen hold down the same button (top right) and at the same time tap the bottom right of the screen.
5. You should now see a Skip Oobe link on the bottom right, press this link.
6. You will now be able to use the Nook Simple Touch without registration.

This worked for me just now.

If that does not work then try this:

This will actually restore it to the same exact way you got it from the store. It's the equivalent of restoring your computer with your installations disks.
Turn off your nook completely. If you are at the "home" screen then hold power button for 3 seconds and choose "Power off" when prompted. If you are in the screen-saver mode then hold power button for 10 seconds until screen will freeze or go blank, or text "Your nook is switched off" will appear.
With it off, hold the power button until the screen flickers black for a moment THEN CONTINUE to hold it for another 15 seconds. You won't see anything happen at this point - but the animated arrows will stop typically.
Repeat the above step 6 times in a row. YES, Six is the magic number that tells the nook to do a restore. At the six time screen will get half white- half black and it's a good sign!
Now press the Power Button once to turn on the nook. The touch screen will go black with a description of what it's doing (restoring). This may take several minutes - do NOT stop it.
After you have it back to factory mode, do the following:
Nook Simple Touch/Factory Mode/Skip Out of Box Experience
On a virgin/factory reset Nook Simple Touch, there's a "Factory" screen that displays various bits about the device, such as model, serial number, MAC address, public key, etc.
After powering on the Nook, you should be presented with a welcome screen with a Next button in the lower right. A "Factory" button will appear in the top left of the screen. Tap it to get to the Factory screen. Skip Oobe (Out-of-box Experience)
While on the Factory screen, hold down the top right button and tap in the bottom right of the screen. A "Skip Oobe" button appears. Tap it to completely bypass the time zone, Wi-Fi and B&N registration process.

bernie

10-13-2017, 07:11 PM	#4
gbm Wizard Posts: 2,082 Karma: 8796704 Join Date: Jun 2010 Device: Kobo Clara HD,Hisence Sero 7 Pro RIP, Nook STR, jetbook lite	1. Turn on your NOOK. 2. At the welcome screen hold down the button on the top right (page turn button) and at the same time slide your finger across the top of the screen from left to right. 3. You should now see a Factory link on the top left of the screen, press this link. 4. On the factory screen hold down the same button (top right) and at the same time tap the bottom right of the screen. 5. You should now see a Skip Oobe link on the bottom right, press this link. 6. You will now be able to use the Nook Simple Touch without registration. This worked for me just now. If that does not work then try this: This will actually restore it to the same exact way you got it from the store. It's the equivalent of restoring your computer with your installations disks. Turn off your nook completely. If you are at the "home" screen then hold power button for 3 seconds and choose "Power off" when prompted. If you are in the screen-saver mode then hold power button for 10 seconds until screen will freeze or go blank, or text "Your nook is switched off" will appear. With it off, hold the power button until the screen flickers black for a moment THEN CONTINUE to hold it for another 15 seconds. You won't see anything happen at this point - but the animated arrows will stop typically. Repeat the above step 6 times in a row. YES, Six is the magic number that tells the nook to do a restore. At the six time screen will get half white- half black and it's a good sign! Now press the Power Button once to turn on the nook. The touch screen will go black with a description of what it's doing (restoring). This may take several minutes - do NOT stop it. After you have it back to factory mode, do the following: Nook Simple Touch/Factory Mode/Skip Out of Box Experience On a virgin/factory reset Nook Simple Touch, there's a "Factory" screen that displays various bits about the device, such as model, serial number, MAC address, public key, etc. After powering on the Nook, you should be presented with a welcome screen with a Next button in the lower right. A "Factory" button will appear in the top left of the screen. Tap it to get to the Factory screen. Skip Oobe (Out-of-box Experience) While on the Factory screen, hold down the top right button and tap in the bottom right of the screen. A "Skip Oobe" button appears. Tap it to completely bypass the time zone, Wi-Fi and B&N registration process. bernie Last edited by gbm; 10-13-2017 at 07:16 PM.