[jimmythesaint]

The only error I found was:

111022:031006 system: E otaup:def:image update failed

The checksum verification passed and there was no "patch failure"

Error is listed in red. Any thoughts?

Thanks man!

11022:030854 init: Switching to runlevel: 5
111022:030854 No USB/Charger found ... entering low power idle
111022:030854 Charger: Turning on CPUFreq
111022:030855 system: I wifi:def:WiFi Device mac = 28:EF:01:33:67:BD
111022:030855 ar6000: Shasta Atheros Ar6000 WiFi Driver
111022:030855 ar6000_probe: initializing!
111022:030855 kernel: I perf:wifi:wifi_driver_loaded=24.29 seconds:
111022:030857 AR6000 Reg Code = 0x80000348
111022:030857 system: I wifi:def:loadAR6000 finished, args=()
111022:030858 system: I wpa_supplicant:def:wpa supplicant started
111022:030859 eink_fb: I bs_cmd_ld_img_upd_data_which:def:temp=31C:from pmic
111022:030900 eink_fb: I bs_cmd_ld_img_upd_data_which:def:temp=31C:from pmic
111022:030900 system: I otaup:defrocessing update /mnt/base-us/Update_525120101-611680021.bin
111022:030900 system: I otaup:def:version is "FC02"
111022:030928 system: I otaup:def:update image checksum OK
111022:031004 system: I mntroot:def:Making root filesystem writeable
111022:031004 EXT3 FS on mmcblk0p1, internal journal
111022:031004 webupdate: I def:webupdate::hop path:
111022:031004 webupdate: C def:webupdate::update path for device (06/536720111) does not exist
111022:031005 eink_fb: I bs_cmd_ld_img_upd_data_which:def:temp=31C:from pmic
111022:031006 system: E otaup:def:image update failed
111022:031007 eink_fb: I bs_cmd_ld_img_upd_data_which:def:temp=31C:from pmic
111022:031008 system: I mntroot:def:Making root filesystem writeable
111022:031010 system: I S30network:def:initializing network configuration
111022:031010 system: I S30network:def:Installed Firewall
111022:031011 system: I S60dbus:def:starting system message bus
111022:031011 pmond[2521]: W def:nopid::No pid file specified
111022:031011 pmond[2521]: W def:nopid::No pid file specified
111022:031011 pmond[2522]: I def:init:mond running
111022:031011 lipc-set-prop[2569]: I lipc:ssprop=start, source=com.lab126.pmond:Set string property
111022:031012 powerd[2572]: I def:accel:found=0:Accelerometer
111022:031012 powerd[2572]: I def:acc::Turn acc port on
111022:031012 Accessory port enable
111022:031012 mxc_keyb: I def:unlocked1:status=unlocked:
111022:031012 fiveway: I def:unlock1:status=unlocked:
111022:031012 powerd[2572]: I def:battinfo:cap=49%, mAh=755mAh, volt=3773mV, current=-192mA, temp=86F, bp=3773mV, lmd=1526mAh, cycl=1, cyct=6:
111022:031012 powerd[2572]: I lipc:evts:name=battLevelChanged, origin=com.lab126.powerd, fparam=49:Event sent
111022:031012 system: I S70cmd:def:starting CMD daemon
111022:031012 lipc-set-prop[2702]: I lipc:ssprop=start, source=com.lab126.pmond:Set string property
111022:031012 cmd[2717]: I def:starting::Starting Connection Manager
111022:031012 system: I S70wifid:def:starting wifid
111022:031013 lipc-set-prop[2726]: I lipc:ssprop=start, source=com.lab126.pmond:Set string property
111022:031013 cmd[2717]: I lipc:gsprop=state, source=com.lab126.powerd:Get string property
111022:031013 cmd[2717]: I lipc:giprop=driveModeState, source=com.lab126.volumd:Get int property
111022:031013 cmd[2717]: E def:drivemode:error=3:Cannot get the lipc property
111022:031013 cmd[2717]: E def:baddrivemode:error=3BUS returned bad value for USB drive mode
111022:031013 cmd[2717]: I lipc:gsprop=cmState, source=com.lab126.wifid:Get string property
111022:031013 cmd[2717]: I lipc:gsprop=cmState, source=com.lab126.wan:Get string property
111022:031013 cmd[2717]: I def:intfna::No connected network interface
111022:031013 cmd[2717]: I lipc:giprop=isCharging, source=com.lab126.powerd:Get int property
111022:031013 cmd[2717]: I def:started::Connection Manager started
111022:031013 No Accessory Found