Quote:
Originally Posted by spaetz
OK, so battery level was an issue.* I charged for 24h and on powerup I now get a green status LED (together with a green bottom middle led).
Other than that nothing has changed, unfortunately: blank screen on bootup independend of whether or what SD card I insert.*Old 1.7 firmware, 2.0RC firmware, all the same. Just a blank screen. :-(
I still own a 650Euro brick.
|
It is not clear for me from your message if you put the upgrade images on the SD-card or not. The firmware is installed in the internal flash, not on the SD-card, so changing SD-card only does not give you a different firmware. Did you try to put the firmware upgrade files on the SDcard and then press the reset button (small hole next to usb). As far as I know, after a reset the boot software first checks if there is an upgrade on the SD-card and installs it without starting the 'normal-firmware'. So if your firmware got corrupted this method should still work.
Good luck with getting it to run again.