Quote:
Originally Posted by Schnitzelbrain
SOOORRY the one I told u was for Firmware update. The procedure is the same exept u have to press the lower large key
1. Connect to Power and switch device off
2. Push + Hold "OK" AND "Large lower" Key
3. Switch Power on
4. Release the Both pressed Key when Messages apear on the screen
5. Wait.......about 10min.
When Hardreset is done device restarts and everything is as it was on delivery.
Sooory again, should work, try it please
|
I had to do this yesterday (the hard reset) and I can tell you, it works fine (even for firmware version 15.2). Just use the LOWER wing button...
I had to do it because somehow I completely mucked up my FBreader - to the point it Would. Not. Work - even after removing the FBreader app from the PB360. I could access Adobe, but nothing for FBreader. I could NOT figure out what I had done (I guess I somehow messed up the new FBreader update GrayNM put out). No book would open, whether it was on the device or the SD card. It would flash and then (I swear!) laugh at me! I was this close - || - to having to send the reader back is how messed up I got my new (!) toy.
So, MmavisO, do give a full reset a try. You WILL lose everything you've got on your device, but I'll lay you even odds you'll get your PB360 back to responding. Then, you'll just have to start over again ... which is still easier than sending it back, yeah?
Oh, and it'll probably come back in a foreign language (mine was German). Just go to your Settings (it'll be the bottom right icon) - Language (second line) and select your language as your first step. I gave you their locations because you probably can't read the foreign language...
The good news is I figured out what I did wrong and now FBreader is working fine (didn't put that .cfg file in the right place).
And, my thanks to you, Schnitzelbrain and mtravellerh, for trying to help MmavisO. Your advice to him about a hard reset saved me countless frustrations (and a possible return of the device).
Let us know if this works and good luck.
Marilyn
P.S. Of course, a hard reset will remove any authorization you have from Adobe Digital Editions (ADE) to access/read DRM material. You'll have to re-authorize the PB360 from your computer/ADE...