Quote:
Originally Posted by theducks
No led blink, the reader is NOT Charging properly.
The battery is DEAD and the unit will not clear the screen because there is no power.
Possible problem items:
Bad USB cord
Try another cord
Bad/damaged connector or plug not inserted fully into PEz
Reinsert the cord, or try another cord
Bad wall charger (if LED will blink when attached to PC (charg on PC for 12 hours
Try to charge it via PC instead. As suggested, see if the LED blinks.
Battery plug (inside battery cover) not inserted correctly
Open the battery cover and check for the plug. Although based on my experience the plug is quite difficult to remove.
Defective battery or internal battery circuit.
I don't know how to check this by yourself
Verify the items on this list and report all the findings to Astak support to allow experts to determine the warranty resolution.
In my experience, Astak support is very helpful.
|
I hope that these will help you, and that it's just a bad cable.