|
First it takes longer to start up right after replacing the batteries, especially if
you are changing the type of battery as well.
It takes a 3 count on the power button, then a wait for it to start. Normally after
the 3 count you will see a flash to part of the display before the cold boot proceeds.
The only time I have had the indicator at 100% after 12hrs was with NiZn 1.6v
batteries, on a test run where one of the four went bad (tested at 0.5v, while the
others were ~1.5v) These running v0.15.
Luck;
Ken
|