Dear All:
There was a firmware upgrade released on April 2, 2010. We did not want to post until we got exactly HOW to get the Firmware Upgrade onto your device!
Mentor Lite
How To do a Firmware Upgrade!!
1. Go to:
www.astak.com/downloadcenter.asp
2. Download latest dated Firmware Upgrade (presently 04-02-2010)
3. After you download, save the file to an SD card.
4. Insert SD card into Mentor Lite SD card slot.
5. Use the USB cable to connect to your PC.
6. This is tricky so please listen carefully: press and hold BOTH the large ENTER Button on the front of the Mentor Lite and the THIRD (3rd) side button from the top… and HOLD for two seconds!! You must press both these buttons and the “reset” button and HOLD for 2-3 seconds.
7. AT THE SAME TIME as you press the front and side buttons , turn the device over and press the reset button with a paper clip. You have to press and hold all three at the same time and HOLD down for 2-3 seconds!!
8. Release the buttons and the Firmware Upgrade will commence.
9. It will tell you on the screen of the Mentor Lite that the Firmware Upgrade is completed when done!!
10. When done, unplug USB cable, remove SD card, and power "ON" the device!