dwonk, the installation instructions are the same as with any other firmware, for instance the Bebook firmware. See below.
Quote:
5. Copy the unpacked file 'V3update.bin' onto the root of an SD card. (SD cardsize should be larger than 128MB, but no greater than 1GB.)
6. Turn off the BeBook
7. Insert the SD card into the BeBook eReader.
8. Press and hold the V+ (volume up button) and turn on the BeBook eReader.
9. When the update interface appears, press the "OK" Button to start and wait until it's finished.
10. Restart the BeBook.
Done!
|
Sander