Quote:
Originally Posted by kartu
TimeTraveler
Yes, except it won't install automatically, you'll see an installer that will guide you through the process.
Don't forget to remove card/installer from the card after it reboots, if you don't want to see the PRS+ installer again. 
No worries, 505/500/300 models are rock solid. You can't brick them into unbrickable state, unless if you don't use hammer/crack it up and solder a bit, etc...
|
Thanks! I did what you said and now I see on the 505:
PRS+ 1.02 Installer
eBook Model 505
Installer eBook
Sony Firmware 1.1.00.18040 1.1.01.25200
PRS+ Firmware 1.0.2 n/a
PRS+ Script 1.0.2 n/a
Working, do not power off!
Log
the last line says:
Flashing partition Rootfs...
It has been like this for about the last half hour. Is this normal?
Thanks