MobileRead Forums - View Single Post

pauli · 03-03-2010, 06:26 PM

BrassMonkey, there is one thing you can try. I'm not sure if it will work, but if you connect the device to your PC using the USB cable, you can access the SD card inside the device. There, look for the dr.ini file in the \system folder. Open this and edit this line:
/apps/er/sys/global/is_first_boot=true
change it into
/apps/er/sys/global/is_first_boot=false

this should skip the stylus calibration procedure...

If the device doesn't show "connected", then you will have to open the back of the device, remove the SD card and use a card reader to access the SD card.

Anyway, CarToys (or iRex) should sent you a stylus ASAP.

03-03-2010, 06:26 PM	#71
pauli Groupie Posts: 185 Karma: 119824 Join Date: Feb 2008 Device: iLiad, DR1000S, HTC Hero, DR800SG	BrassMonkey, there is one thing you can try. I'm not sure if it will work, but if you connect the device to your PC using the USB cable, you can access the SD card inside the device. There, look for the dr.ini file in the \system folder. Open this and edit this line: /apps/er/sys/global/is_first_boot=true change it into /apps/er/sys/global/is_first_boot=false this should skip the stylus calibration procedure... If the device doesn't show "connected", then you will have to open the back of the device, remove the SD card and use a card reader to access the SD card. Anyway, CarToys (or iRex) should sent you a stylus ASAP. Last edited by pauli; 03-03-2010 at 06:39 PM.