Quote:
Originally Posted by babo
Jointech has officially announced that even in their JE200 firmware there is the same problem with "some" sdhc cards!
From: JoinTech <groups.joint...@gmail.com>
Date: Tue, 19 Jan 2010 21:55:43 -0800 (PST)
Local: Wed, Jan 20 2010 6:55 am
Subject: Re: My sd donīt work
The SDHC is supported in JE200. It will work with Sd cards of 4 GB,8
GB or 16 GB etc.
Make sure the SD cards are formated as FAT file system and should not
be FAT32.
You can check this by Right-Mouse-Click in your PC by using the SD
card reader and also can format using your PC.
Once you put the 4GB or 8 GB card, it will show up withine 2 secs. The
16 GB card may take some time up to even 10 or 15 secs to appear.
For some cards from some vendors, you might need to restart the device
also if the SD card does not appear.
|
I used the hack and am using a 4GB micro sdhc card formatted as FAT32 and it works fine.
Any word on anyone getting their hands of the original files to go back to the 2GB card? Though I like the idea of higher capacity, I have to reboot a lot due to the sleep issue. You think Jointech support would email the files if asked?
K