MobileRead Forums - View Single Post

kindx · 02-04-2010, 04:21 PM

Hi,

based on informations about the serial console for DX, I wanted to have a smart way to connect to PC.
First I thought about using the headphone connector for RS232 because I don't need audio, but on the other hand you never can tell.

So I searched for a way to have a second connector, because there is less space I recyled a MP3 player connector (short neck!) and did some cutting and drilling (see attached files).

Now just waiting for the USB-RS232 TTL3.3V adapter to arrive ...

Update:
USB Adapter works fine
Serial Settings are: 115200 baud, 8 data bits, 1 stop bit, no parity, no flow control

02-04-2010, 04:21 PM	#1
kindx Member Posts: 11 Karma: 10 Join Date: Feb 2010 Device: kindle dxi	Kindle DX RS232 Connector Hi, based on informations about the serial console for DX, I wanted to have a smart way to connect to PC. First I thought about using the headphone connector for RS232 because I don't need audio, but on the other hand you never can tell. So I searched for a way to have a second connector, because there is less space I recyled a MP3 player connector (short neck!) and did some cutting and drilling (see attached files). Now just waiting for the USB-RS232 TTL3.3V adapter to arrive ... Update: USB Adapter works fine Serial Settings are: 115200 baud, 8 data bits, 1 stop bit, no parity, no flow control Attached Thumbnails Last edited by kindx; 02-05-2010 at 04:43 PM.