MobileRead Forums - View Single Post - Give to your JE100 sdhc capability!!! 16gb

babo · 02-03-2010, 06:55 PM

Jointech has officially announced that even in their JE200 firmware there is the same problem with "some" sdhc cards!

From: JoinTech <groups.joint...@gmail.com>
Date: Tue, 19 Jan 2010 21:55:43 -0800 (PST)
Local: Wed, Jan 20 2010 6:55 am
Subject: Re: My sd don´t work

The SDHC is supported in JE200. It will work with Sd cards of 4 GB,8
GB or 16 GB etc.

Make sure the SD cards are formated as FAT file system and should not
be FAT32.

You can check this by Right-Mouse-Click in your PC by using the SD
card reader and also can format using your PC.

Once you put the 4GB or 8 GB card, it will show up withine 2 secs. The
16 GB card may take some time up to even 10 or 15 secs to appear.

For some cards from some vendors, you might need to restart the device
also if the SD card does not appear.

Link: http://groups.google.com/group/joint...5acdb25fb685b#

02-03-2010, 06:55 PM	#43
babo Member Posts: 18 Karma: 10 Join Date: Jan 2010 Device: je100	Look what I found here! Jointech has officially announced that even in their JE200 firmware there is the same problem with "some" sdhc cards! From: JoinTech <groups.joint...@gmail.com> Date: Tue, 19 Jan 2010 21:55:43 -0800 (PST) Local: Wed, Jan 20 2010 6:55 am Subject: Re: My sd don´t work The SDHC is supported in JE200. It will work with Sd cards of 4 GB,8 GB or 16 GB etc. Make sure the SD cards are formated as FAT file system and should not be FAT32. You can check this by Right-Mouse-Click in your PC by using the SD card reader and also can format using your PC. Once you put the 4GB or 8 GB card, it will show up withine 2 secs. The 16 GB card may take some time up to even 10 or 15 secs to appear. For some cards from some vendors, you might need to restart the device also if the SD card does not appear. Link: http://groups.google.com/group/joint...5acdb25fb685b# Last edited by babo; 02-03-2010 at 06:59 PM.