MobileRead Forums - View Single Post - PRS-300 How do I reset PRS-300 to original condition?

DougFNJ · 01-22-2010, 11:33 AM

Did a little search and came up with this.....

https://www.mobileread.com/forums/showthread.php?t=66722

According to sony this is how you do a hard reset on a 300 reader.

WARNING: A hard reset will erase all content on the Reader.

1. Power off the Reader.
2. On the bottom edge of the Reader, using the stylus, press the RESET button.
3. Turn on the Reader.
4. While the screen displays Opening book... , simultaneously press and hold down the down arrow of the directional button and the 0 button until the Reset All screen is displayed.

NOTE: If Opening book... does not display on the screen, charge the Reader's battery for several hours before attempting the reset process again.
5. Press the 5 button to reset the Reader.

01-22-2010, 11:33 AM	#2
DougFNJ Avid Reader Posts: 273 Karma: 1332 Join Date: Dec 2006 Location: New Jersey Device: Kindle Paperwhite Signature, 2TB iPad Pro 11”	Did a little search and came up with this..... https://www.mobileread.com/forums/showthread.php?t=66722 According to sony this is how you do a hard reset on a 300 reader. WARNING: A hard reset will erase all content on the Reader. 1. Power off the Reader. 2. On the bottom edge of the Reader, using the stylus, press the RESET button. 3. Turn on the Reader. 4. While the screen displays Opening book... , simultaneously press and hold down the down arrow of the directional button and the 0 button until the Reset All screen is displayed. NOTE: If Opening book... does not display on the screen, charge the Reader's battery for several hours before attempting the reset process again. 5. Press the 5 button to reset the Reader.