Current version 0.15 supports all books on
www.ereader.com and all PDB-books.
All books at
www.barnesandnobel.com are available in PDB format. So You can easily download any ebook from the most popular book store in the USA – Barnes and Nobel.
Please, verify if You have the current version of Jetbook. Go to Settings – System Settings – Firmware Version.
If You have 0.14, please update Your Jetbook to 0.15:
1. Download and unpack the firmware package and then transfer the Data, firmware, and reflash_nor folders to the root directory of an SD card. Make sure your SD card does not contain any files other than those found in the firmware package.
2. Place the SD card into your jetBook SD slot.
3. Press the Reset button. The device will turn off. Do not turn it on.
4. Press and hold the On/Off button and right arrow key simultaneously until the jetBook logo appears on the screen.
5. The update process will take about 10 – 15 minutes.
WARNING! Do not press any keys on your jetBook while updating is in progress!
6. When the update process is complete, press the Reset button. The device will turn off.
7. Press and hold the On/Off button for 3 seconds. Release the button. jetBook will start within 1 minute.
8. Firmware update process is completed at this point.
ftp://custftp:FQSswyvGQ20So@ftp.ecta.../Lite_0.15.exe
If You have any problems to update Your Jetbook to the current version, please contact ECTACO Tech Support over email
pavel@ectaco.com or by phone 1-718-728-6110