[flyfisher]

Hello,

I hope I'm not intruding by posting this. But I just couldn't resist.

I have the Astak EZ Reader 6" with the lastest rc of OI installed. I have also noticed that OI doesn't show me the folders placed in the internal memory.

I hope this helps improve this already marvelous firmware.

flyfisher

/mnt/storage/.home/user$ mount
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev type tmpfs (rw,size=10240k,mode=755)
devpts on /dev/pts type devpts (rw,mode=600)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,size=10240k)
/dev/mmcblk0p1 on /media/sd type vfat (rw,noatime,fmask=0000,dmask=0000,allow_utime=0022 ,codepage=cp437,iocharset=utf8,flush)
tmpfs on /tmp type tmpfs (rw)
tmpfs on /var/run type tmpfs (rw)
tmpfs on /var/tmp type tmpfs (rw)
tmpfs on /var/log type tmpfs (rw)
/dev/mtdblock_STORAGE on /mnt/storage type jffs2 (rw,noatime)

/mnt/storage/.home/user$ dmesg
<5>[ 0.000000] Linux version 2.6.29-v3ext (pbuilder@ab) (gcc version 4.3.2 (Debian 4.3.2-1.ip2) ) #2 Mon Nov 16 03:57:12 UTC 2009
<4>[ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
<4>[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
<4>[ 0.000000] Machine: LBOOK_V3
<7>[ 0.000000] Converting old-style param struct to taglist
<4>[ 0.000000] ATAG_INITRD is deprecated; please update your bootloader.
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat c01e35a0, node_mem_map c0226000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
<4>[ 0.000000] CPU S3C2410A (id 0x32410002)
<6>[ 0.000000] S3C24XX Clocks, (c) 2004 Simtec Electronics
<4>[ 0.000000] S3C2410: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
<4>[ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: noinitrd root=/dev/mtdblock1 rootfstype=jffs2 rootflags=noatime ip=192.168.111.1 console=ttySAC0
<4>[ 0.000000] irq: clearing subpending status 00000010
<4>[ 0.000000] PID hash table entries: 128 (order: 7, 512 bytes)
<7>[ 0.000000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
<4>[21474536.480000] Console: colour dummy device 80x30
<6>[21474536.480000] console [ttySAC0] enabled
<6>[21474536.485000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[21474536.495000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[21474536.505000] Memory: 32MB = 32MB total
<5>[21474536.505000] Memory: 30284KB available (1716K code, 344K data, 100K init)
<6>[21474536.510000] Calibrating delay loop... 99.73 BogoMIPS (lpj=249344)
<4>[21474536.605000] Mount-cache hash table entries: 512
<6>[21474536.610000] CPU: Testing write buffer coherency: ok
<6>[21474536.620000] net_namespace: 296 bytes
<6>[21474536.625000] NET: Registered protocol family 16
<4>[21474536.650000] S3C2410 Power Management, (c) 2004 Simtec Electronics
<6>[21474536.665000] s3c24xx-pwm s3c24xx-pwm.0: tin at 25000000, tdiv at 25000000, tin=divclk, base 0
<4>[21474536.675000] S3C2410: Initialising architecture
<4>[21474536.675000] S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<4>[21474536.680000] DMA channel 0 at c2808000, irq 33
<4>[21474536.680000] DMA channel 1 at c2808040, irq 34
<4>[21474536.685000] DMA channel 2 at c2808080, irq 35
<4>[21474536.690000] DMA channel 3 at c28080c0, irq 36
<4>[21474536.720000] bio: create slab <bio-0> at 0
<6>[21474536.740000] NET: Registered protocol family 2
<6>[21474536.745000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[21474536.750000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>[21474536.755000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[21474536.760000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[21474536.765000] TCP reno registered
<6>[21474536.770000] NET: Registered protocol family 1
<6>[21474536.785000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
<6>[21474536.790000] msgmni has been set to 59
<6>[21474536.795000] io scheduler noop registered (default)
<6>[21474538.665000] fb0: eInk Apollo frame buffer device,using 468K of video memory (c2872000)
<6>[21474539.690000] s3c2410-uart.1: s3c2410_serial0 at MMIO 0x50004000 (irq = 73) is a S3C2410
<4>[21474539.700000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
<6>[21474539.705000] s3c2410-nand s3c2410-nand: Tacls=4, 40ns Twrph0=7 70ns, Twrph1=4 40ns
<6>[21474539.710000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
<6>[21474539.715000] Scanning device for bad blocks
<5>[21474539.900000] Creating 6 MTD partitions on "NAND 512MiB 3,3V 8-bit":
<5>[21474539.905000] 0x000000800000-0x000000900000 : "KERNEL"
<5>[21474539.915000] 0x000000900000-0x000003b00000 : "ROOTFS"
<5>[21474539.920000] 0x000003b00000-0x000003c00000 : "LOGO"
<5>[21474539.925000] 0x000003c00000-0x000003e00000 : "USERDATA"
<5>[21474539.930000] 0x000003e00000-0x000020000000 : "STORAGE"
<5>[21474539.940000] 0x000000000000-0x000000800000 : "SPARE"
<4>[21474540.955000] IRQ 48/s3c2410_udc: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[21474540.960000] wake enabled for irq 48
<4>[21474540.965000] g_ether gadget: using random self ethernet address
<4>[21474540.970000] g_ether gadget: using random host ethernet address
<6>[21474540.980000] usb0: MAC b2:5e:94:e4:28:5d
<6>[21474540.980000] usb0: HOST MAC f6:b4:32:12:2d:1a
<6>[21474540.985000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
<6>[21474540.990000] g_ether gadget: g_ether ready
<4>[21474540.990000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
<6>[21474540.995000] s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>[21474541.000000] s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
<6>[21474541.010000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
<6>[21474541.015000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
<6>[21474541.025000] cpuidle: using governor ladder
<6>[21474541.025000] Registered led device: led:red
<6>[21474541.030000] Registered led device: led:green
<6>[21474541.035000] TCP cubic registered
<3>[21474541.045000] s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
<4>[21474541.745000] VFS: Mounted root (jffs2 filesystem) on device 31:1.
<6>[21474541.750000] Freeing init memory: 100K
<6>[21474541.965000] g_ether gadget: full speed config #2: RNDIS
<6>[21474549.675000] input: lbookv3-keys as /class/input/input0
<6>[21474549.675000] wake enabled for irq 16
<6>[21474549.680000] wake enabled for irq 17
<6>[21474549.685000] wake enabled for irq 18
<6>[21474549.690000] wake enabled for irq 50
<4>[21474551.300000] IRQ 48/usb power: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[21474551.305000] wake enabled for irq 53
<6>[21474551.310000] wake enabled for irq 54
<6>[21474552.155000] wake enabled for irq 49
<4>[21474552.155000] mapped channel 0 to 0
<6>[21474552.180000] s3c2410-sdi s3c2410-sdi: powered down.
<6>[21474552.180000] s3c2410-sdi s3c2410-sdi: initialisation done.
<6>[21474552.190000] s3c2410-sdi s3c2410-sdi: running at 0kHz (requested: 0kHz).
<6>[21474552.195000] s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>[21474552.205000] s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>[21474552.225000] s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>[21474552.240000] s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>[21474552.245000] s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>[21474552.260000] s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>[21474552.545000] s3c2410-sdi s3c2410-sdi: running at 98kHz (requested: 97kHz).
<6>[21474552.565000] s3c2410-sdi s3c2410-sdi: running at 25000kHz (requested: 25000kHz).
<6>[21474552.575000] s3c2410-sdi s3c2410-sdi: running at 25000kHz (requested: 25000kHz).
<6>[21474552.580000] mmc0: new SDHC card at address aaaa
<6>[21474552.595000] mmcblk0: mmc0:aaaa SD04G 3.69 GiB
<6>[21474552.600000] mmcblk0: p1
<3>[21474554.395000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
<3>[21474555.985000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!