In anticipation of a PP appearing under the tree, and the intelligence of always pursuing the latest firmware upgrade, I have spent most of the day searching for an illusive reference to misleading instructions in the FAQ for firmware updating on the PP.
I actually interrupted this post to try one more time with the "Search" option in the menu bar instead of the "Search" button found at the top right of every page, and I found it.
On 10/01/09
Quote:
Originally Posted by Javed
Can someone please tell me what button to press etc when I turn on the Pocket Pro to to a firmware update? I'm up to step 4 but does the "silver volume button" apply to the PP? Does this mean the page turning button on the side? Or do I press something else? Thanks.
From the Astak website:
4. Then, first holding down the silver "volume up" button on the right side of the EZ Reader, then press the ON button to turn on your EZ Reader.
|
Quote:
Originally Posted by DaleDe
This is the description for the V3 not the V5. For the V5 the 4th step is to hold down the upper button on the left top side (next page).
Dale
|
Since instruction 2 is able to address the differences between the EZ and the PP:
Quote:
|
2. After unzipping, put the ".bin" file on your SD card. Your SD card must be 4GB or smaller (for the 6" EZ Reader) or 16GB or smaller (for the 5"PocketPRO) to do this.
|
shouldn't Instruction 4 be updated to do the same?:
4. Then, holding down the silver "volume up" button on the right side of the EZ Reader ("next page" button on the left side for the 5"PocketPRO), press the ON button to turn on your EZ Reader."
Just thought I'd bring it up since the question was asked 2 months ago and the instructions remain incomplete. Maybe that could be changed while adding information on the search function.