Quote:
Originally Posted by RTownsend
I can't get it out and can't tell what kind of screws they have used on the back of the product.
Any ideas as the where I might obtain the correct sized screw driver would be helpful.
|
Almost all DIY stores sell the
screwdriver you need, just take you're ILiad to you're local hardware-store. Those usually cost something like 5 dollar. While you're there you might want to buy some glue.
- Two of the sides (flipbar and bottom) are kept together with those snap-clip-thingies. You might need a creditcard or 2 to release them. Start with the bottom 2, then the other 3 are easy)
https://wiki.mobileread.com/images/6/63/Fig3a.jpg (you can see the 5 snap-clip-thingies here)
http://sites.google.com/site/iliaddeveloper/fig1.jpg (v1 back-side screwholes. The v2 has less screws(8), but those that are there are at the same places)
- Take you're time, the screen is fragile.
Good luck