MobileRead Forums - View Single Post

kacir · 11-11-2009, 01:00 PM

EDIT: There is Part II of the review available in the thread.

I was looking for an e-ink device to upgrade my aging Sony PRS-500 reader for quite some time.

Ever since I have seen first proposals for Pocket Book 360° design on The-ebook.org forum I was planning to get one eventually.

So I did get one. Finally. I purchased an original Ukrainian package from our member Forgosigan.

Originally I wanted to purchase black unit, because I thought the screen would appear lighter when surrounded by a black bezel, and I am used to black reader from my PRS-500 anyway. Forkosigan persuaded me to buy "ivory" colored unit. He said that the text appears blacker on a screen with light bezel. Besides, he did not have any black units left ;-)
I have purchased light colored one and I am happy.
The color of the unit is not bright white, it is light "PC case" beige with pearly - silvery, almost metallic surface. There is grey plastic border around the screen. The resulting combination is very pleasing, and indeed, the letters look *almost* "like lacquered chopsticks on a clean tablecloth" :-)

I LOVE the detachable lid. It protects the screen very well without adding bulk to the device. I like the user replaceable battery. You should update the manual, however, there are no markings at the back of the device indicating that this is the door to the battery compartment and reset button. It is also not apparent how to open the door once you start looking for the Reset button. (I did not need it yet, despite my furious tests).
There is only one thing I do not like in hardware. It is audible click when you press the button. I can still read without disturbing my sleeping partner, but I would have prefered a little bit quieter click.

With a few books in internal memory the device boots in under 21 seconds. It also takes less than 21 seconds to boot the machine with an SD card with over a thousand files on it freshly inserted. I am very impressed. Everything is configurable. You can configure the device to take you after the boot directly to the book you were reading when you switch it off, and I used that option when timing "cold boot".

When you insert SD card with 10 folders on it and you have another 15 folders with books already in main memory you are presented with a library that combines those top folders, so in a main library you see all 25 folders plus whatever books you have on the root of the card or in the root of the main memory "disk". You do not see folders with names starting with dot (which is standard Unix and Linux behaviour). There is an icon indicating whether the file resides on a card or in memory.
There is another icon present next to file name. No icon means the book was not opened, an "open book" icon means you are reading the books and reader remembers your position, a "checkbox" icon means the book was finished. The states are saved in a file accessible from main memory when you connect the reader to PC, the "not yet opened", "being read" and "finished" flag can also be reset from the menu described below.
You can manage files directly from PocketBook user interface. Just press and hold the OK button to get menu.
you can do following actions
- Open book
- view information and metadata
- mark as Read (or finished)
- File
. - rename
. - Move to folder
. - copy to SD card (or main memory, depending on where the book is)
. - Move to SD card
. - Delete
. - Mark group
- set view for files as
. - list
. - thumbnails
. - details
. - set screen orientation (any angle 0, 90, 180, 270, or gyro sensor)
- Sort
. - by title
. - by author
. - by series
. - by creation time
- Show names as
. - book titles
. - file names
- find book
I havent, yet, discovered how to create a folder.

There are basically three kinds of book files you can read on PB. Files with rigid layout, such as pdf and djvu files, files that are reflowable, such as fb2, fb2.zip, txt, rtf, html, chm, doc, epub and tcr and comics. In this review I will not talk about pdf files, that will take another long post. I said that pdf files have rigid structure, but according to the manual you *can* reflow, zoom or read in column mode pdf files.
Reflowable files are opened in an application FBreader. FBreader is very configurable. It discards most of the formatting information from rtf, doc and displays text fully justified, in an user selected font.
In FBreader you can configure
- font (face, size)
- encoding (there are quite a lot of options missing, but you can use UTF-8, so I do not see a problem. Encoding options are: auto, Win-1251, Win-1252, Win-1255, KOI8-R, KOI8-U, IBM866, ISO-8859-1, ISO-8859-5, UTF-8)
- line spacing (from 70 to 200%)
- page margins in three steps, starting with no margin
- hyphenations
- line breaks (auto, new line, empty line, line with indent), so PB can display "raw, plain vanilla" Project Gutenberg text file surprisingly well

There are further settings that affect the FBreader under settings icon on the main menu. Among many, many interesting things you can set Apperance - theme, interface font, boot logo, text rendering (Not antialiased, Antialiased, embolded)

Let us get back to the FBreader.
There is a very thin status bar at the bottom of the screen when you read the book, It contains following info:
[page #] / [number of pages], name of the book in a very tiny font, percentage of the book you have read so far, a graphical progress bar, time and battery indicator. When you open the book, or when you change screen orientation or font or size of font there are just three dots displayed instead of page number and progress bar - this is indication that the device is repaginating the book.

You can use custom fonts. Just copy ttf font into Fonts directory on the main memory when you connect reader to the PC. If you provide device with just one variant of the font, the bold and italic text is simulated, just like on Sony reader. When you load all for variants of the font - normal, bold, itallics and bold itallics the device uses that and you get real italics. (Just have a look at the shape of the 'a' letter to see if you have real italics. See? 'a' versus 'a'. I strongly recommend font Droid that was developed specifically for small displays on Android operating system and released under Apache licence. I very much like the way fonts are displayed, rendered, antialiased, and hinted on PocketBook

I have only one question concerning FBreader for our resident PocketBook resellers. How do I configure FBreader to use left justification instead of full justification? I think have seen description of how to modify a FBreader config file (easily accesible in main memory when you connect the reader) somewhere on the-ebook.org forum, but I can not find it right now.
Another question is, what happens when user deletes system files from main memory? (Do not worry dear readers, there are only some configuration files, files with state of the books and such things in the user mountable main memory, so you can not delete some important system file.) How can this be corrected? Can this be remedied by using "factory default option" oe perhaps by formatting internal memory from Settings or by reflashing firmware? I am NOT going to try, but sooner or later somebody WILL delete some files.

To be continued ...

Now let us see some unpacking photos, shot with a mobile phone camera under very adverse lighting conditions. During weekend I will try to borrow a better camera and make better shots, might be even a video.

11-11-2009, 01:00 PM	#1
kacir Wizard Posts: 3,463 Karma: 10684861 Join Date: May 2006 Device: PocketBook 360, before it was Sony Reader, cassiopeia A-20	PocketBook 360° review EDIT: There is Part II of the review available in the thread. I was looking for an e-ink device to upgrade my aging Sony PRS-500 reader for quite some time. Ever since I have seen first proposals for Pocket Book 360° design on The-ebook.org forum I was planning to get one eventually. So I did get one. Finally. I purchased an original Ukrainian package from our member Forgosigan. Originally I wanted to purchase black unit, because I thought the screen would appear lighter when surrounded by a black bezel, and I am used to black reader from my PRS-500 anyway. Forkosigan persuaded me to buy "ivory" colored unit. He said that the text appears blacker on a screen with light bezel. Besides, he did not have any black units left ;-) I have purchased light colored one and I am happy. The color of the unit is not bright white, it is light "PC case" beige with pearly - silvery, almost metallic surface. There is grey plastic border around the screen. The resulting combination is very pleasing, and indeed, the letters look almost "like lacquered chopsticks on a clean tablecloth" :-) I LOVE the detachable lid. It protects the screen very well without adding bulk to the device. I like the user replaceable battery. You should update the manual, however, there are no markings at the back of the device indicating that this is the door to the battery compartment and reset button. It is also not apparent how to open the door once you start looking for the Reset button. (I did not need it yet, despite my furious tests). There is only one thing I do not like in hardware. It is audible click when you press the button. I can still read without disturbing my sleeping partner, but I would have prefered a little bit quieter click. With a few books in internal memory the device boots in under 21 seconds. It also takes less than 21 seconds to boot the machine with an SD card with over a thousand files on it freshly inserted. I am very impressed. Everything is configurable. You can configure the device to take you after the boot directly to the book you were reading when you switch it off, and I used that option when timing "cold boot". When you insert SD card with 10 folders on it and you have another 15 folders with books already in main memory you are presented with a library that combines those top folders, so in a main library you see all 25 folders plus whatever books you have on the root of the card or in the root of the main memory "disk". You do not see folders with names starting with dot (which is standard Unix and Linux behaviour). There is an icon indicating whether the file resides on a card or in memory. There is another icon present next to file name. No icon means the book was not opened, an "open book" icon means you are reading the books and reader remembers your position, a "checkbox" icon means the book was finished. The states are saved in a file accessible from main memory when you connect the reader to PC, the "not yet opened", "being read" and "finished" flag can also be reset from the menu described below. You can manage files directly from PocketBook user interface. Just press and hold the OK button to get menu. you can do following actions - Open book - view information and metadata - mark as Read (or finished) - File . - rename . - Move to folder . - copy to SD card (or main memory, depending on where the book is) . - Move to SD card . - Delete . - Mark group - set view for files as . - list . - thumbnails . - details . - set screen orientation (any angle 0, 90, 180, 270, or gyro sensor) - Sort . - by title . - by author . - by series . - by creation time - Show names as . - book titles . - file names - find book I havent, yet, discovered how to create a folder. There are basically three kinds of book files you can read on PB. Files with rigid layout, such as pdf and djvu files, files that are reflowable, such as fb2, fb2.zip, txt, rtf, html, chm, doc, epub and tcr and comics. In this review I will not talk about pdf files, that will take another long post. I said that pdf files have rigid structure, but according to the manual you can reflow, zoom or read in column mode pdf files. Reflowable files are opened in an application FBreader. FBreader is very configurable. It discards most of the formatting information from rtf, doc and displays text fully justified, in an user selected font. In FBreader you can configure - font (face, size) - encoding (there are quite a lot of options missing, but you can use UTF-8, so I do not see a problem. Encoding options are: auto, Win-1251, Win-1252, Win-1255, KOI8-R, KOI8-U, IBM866, ISO-8859-1, ISO-8859-5, UTF-8) - line spacing (from 70 to 200%) - page margins in three steps, starting with no margin - hyphenations - line breaks (auto, new line, empty line, line with indent), so PB can display "raw, plain vanilla" Project Gutenberg text file surprisingly well There are further settings that affect the FBreader under settings icon on the main menu. Among many, many interesting things you can set Apperance - theme, interface font, boot logo, text rendering (Not antialiased, Antialiased, embolded) Let us get back to the FBreader. There is a very thin status bar at the bottom of the screen when you read the book, It contains following info: [page #] / [number of pages], name of the book in a very tiny font, percentage of the book you have read so far, a graphical progress bar, time and battery indicator. When you open the book, or when you change screen orientation or font or size of font there are just three dots displayed instead of page number and progress bar - this is indication that the device is repaginating the book. You can use custom fonts. Just copy ttf font into Fonts directory on the main memory when you connect reader to the PC. If you provide device with just one variant of the font, the bold and italic text is simulated, just like on Sony reader. When you load all for variants of the font - normal, bold, itallics and bold itallics the device uses that and you get real italics. (Just have a look at the shape of the 'a' letter to see if you have real italics. See? 'a' versus 'a'. I strongly recommend font Droid that was developed specifically for small displays on Android operating system and released under Apache licence. I very much like the way fonts are displayed, rendered, antialiased, and hinted on PocketBook I have only one question concerning FBreader for our resident PocketBook resellers. How do I configure FBreader to use left justification instead of full justification? I think have seen description of how to modify a FBreader config file (easily accesible in main memory when you connect the reader) somewhere on the-ebook.org forum, but I can not find it right now. Another question is, what happens when user deletes system files from main memory? (Do not worry dear readers, there are only some configuration files, files with state of the books and such things in the user mountable main memory, so you can not delete some important system file.) How can this be corrected? Can this be remedied by using "factory default option" oe perhaps by formatting internal memory from Settings or by reflashing firmware? I am NOT going to try, but sooner or later somebody WILL delete some files. To be continued ... Now let us see some unpacking photos, shot with a mobile phone camera under very adverse lighting conditions. During weekend I will try to borrow a better camera and make better shots, might be even a video. Attached Thumbnails Last edited by kacir; 11-12-2009 at 01:52 PM.