Quote:
Originally Posted by AJ Starr
I just transferred several large files, through the usb cable to the PEZ.
I didn't have any problems, as I have had NO PROBLEMS at all on any aspects of the PEZ.
One of the earlier posts reminded us that the USB port that you use on your computer needs to be the direct port, not an extension, AND some of the computers use internal extensions to the front or back of the unit.
Before you cry foul that it is all PEZs having problems, check to make sure it's not your computer's ports. It seems only a handful of people have this problem, and by deduction reasoning, it is more likely your computer's hardware or software (i.e., firewall) problem than the firmware of the PEZ which works for everyone else.
I empathize to your problem, but please don't demand a change to something that is working, just because you are having problems. 
AJ |
Requiring a direct port does sound quite a reasonable solution. I have experienced the hang on copying files over to the PP twice. Both occasions the transfer was about 15-20mb, but all my USB ports on my laptop were being used (it did actually finish copying without intervention). I just had a look at my system logs, 5 USB hubs are detected, yet 4 ports exist on my laptop. The USB port issue isn't a problem for me at all. Would be interesting to know from the ones who are having problems if they experience similar issues with other powered USB2.0 devices? ie: other e-readers, late model ipods, mobile phones etc.