Quote:
Originally Posted by AJ Starr
I just transferred several large files, through the usb cable to the PEZ.
I didn't have any problems, as I have had NO PROBLEMS at all on any aspects of the PEZ.
One of the earlier posts reminded us that the USB port that you use on your computer needs to be the direct port, not an extension, AND some of the computers use internal extensions to the front or back of the unit.
Before you cry foul that it is all PEZs having problems, check to make sure it's not your computer's ports. It seems only a handful of people have this problem, and by deduction reasoning, it is more likely your computer's hardware or software (i.e., firewall) problem than the firmware of the PEZ which works for everyone else.
I empathize to your problem, but please don't demand a change to something that is working, just because you are having problems. 
AJ |
Tested on the ports on the Back (mainboard) as well as the front, Back and side on the Laptop.
Firewall, XP does not have a Firewall (setting) on USB ports.
AVG is my A/V and I will try with that OFF (common to all failed systems). I will report back .
Update: Disabled the A/V (and put the drive letters on the Exclude list). No change.
First time I plug in(Black group USB Port on Rear of Dell), Press OK/Menu, drive letters are assigned, but can not see contents.
I "safely disconnect". Re-attach PEz. Single Bonk tone, but NO drives show up.