|
Hm.. Still not a happy camper.
I did.
1: Wipe the SD.
2: Diskcheck on the SD (no errors)
3: Remount it (no problems).
4: Transfer the Baen free library to SD card (~64 Mb) (takes about 20 minutes).
5: Just to make sure, go to terminal and do a 'sync' (takes another 20 minutes).
6: Unmount SD.
7: Unplug device (the device now does not come up, this seems to be the case every time i change anything on the card (tried 3 times, same result every time)).
8: Reset device (it comes up again (pheww)).
9: Plug the device back in (the SD card now mounts as read-only <-- Not good)
10: Diskcheck on the SD card now reveals lots of errors.
This looks like a broken SD card (I dont have a known working card, so cant really test this).
Will try to pick up another some time next week ('ish).
|