Quote:
Originally Posted by Javed
Can someone please tell me what button to press etc when I turn on the Pocket Pro to to a firmware update? I'm up to step 4 but does the "silver volume button" apply to the PP? Does this mean the page turning button on the side? Or do I press something else? Thanks.
From the Astak website:
1. After downloading the upgrade from our website, you must first unzip the file on your computer.
2. After unzipping, put the ".bin" file on your SD card. Your SD card must be 4GB or smaller (for the 6" EZ Reader) or 16GB or smaller (for the 5"PocketPRO) to do this.
3. Turn OFF your EZ Reader, and then insert the SD card into your EZ Reader.
4. Then, first holding down the silver "volume up" button on the right side of the EZ Reader, then press the ON button to turn on your EZ Reader.
5. Keep pressing the buttons until you hear a beep-beep sound.
6. The screen will display a message to ask if you want to update the firmware, so press the OK button to confirm, and wait until it finishes loading the firmware. Then you're done!
|
This is the description for the V3 not the V5. For the V5 the 4th step is to hold down the upper button on the left top side (next page).
Dale