MobileRead Forums - View Single Post

imode · 07-06-2009, 08:42 PM

HOST_IP is the IP of your PC on the network you created. Before enabling `usbNetwork ensure that the cable is plugged in. Also, when issuing the `usbNetwork command ensure the first character is: ` (back tick) and not '. Ignore the `usbQa command, you don't need it. In fact, issuing the `usbQa command is probably what is causing your issue since I suspect it is trying to set the IP address of the kindle to a fixed value, i.e. .204

This works on both the K2 and the DX.

07-06-2009, 08:42 PM	#52
imode Junior Member Posts: 5 Karma: 10 Join Date: Jul 2009 Device: Kindle 2	HOST_IP is the IP of your PC on the network you created. Before enabling `usbNetwork ensure that the cable is plugged in. Also, when issuing the `usbNetwork command ensure the first character is: ` (back tick) and not '. Ignore the `usbQa command, you don't need it. In fact, issuing the `usbQa command is probably what is causing your issue since I suspect it is trying to set the IP address of the kindle to a fixed value, i.e. .204 This works on both the K2 and the DX. Last edited by imode; 07-07-2009 at 04:48 AM.