MobileRead Forums - View Single Post - SmartQ 7

gen · 07-02-2009, 10:34 PM

Hi Everyone.

Have anyone checked out this fellow's blog? (correction, its not a person, but a company)

http://www.jiongtang.com/blog/

There are alot of info on the SmartQ 7(n 5 plus many others). including pictures of it being stripped. you can see the big battery behind(looks like there are lots of space for future mod).
http://www.jiongtang.com/blog/html/s...rt-images.html

Some pictures (from the blog, more and higher res pictures there)

The battery is soldered on to the board, but it looks simple to replace.

LCD Cable connector to System board

1GB Flash INAND Memory - SanDisk

Audio Chip : Wolfson WM8987G - power output:13mW, DAC SNR 98dB, ADC SNR 90dB

The touchscreen

System Board

Encryption Chip : AT88SC 0104C http://www.atmel.com/dyn/resources/p...ts/doc2044.pdf

128MB DDR RAM

Wireless LAN Module USI WM-G-MR-09 Power - Idle:0.6mA, Receive:170mA, Send:265mA

The Samsung S3C6410 Arm11 Processor (Seems like its pretty powerful)
(info from http://www.arm.com/community/display...roductId/2644/)
• ARM1176ZJF 533/667MHz
• 65nm low-power process
• DVFS power management
• mDDR/DDR and mSDR/SDR
• WVGA or higher display resolution
• Hard-wired 3D GFX accelerator
 – OpenGL ES 1.1/2.0
• Hard-wired multimedia (>WVGA)
 – MPEG-4 SP codec
 – H.264/263 BP codec
 – VC-1 (WMV9) decoder
 – JPEG/2D hardware
 – Hardware rotator & post processor
 – TV encoder
• DMA
• Security hardware: DES/3DES, AES, SHA-1
• High-speed connectivity
 – UART
 – High-speed SPI
 – USB 2.0 OTG
 – High-speed MMC
 – MMC+/eMMC
 – SDHC 4-bit
 – SD cards/iNAND 2.0
 – I2S

MSN IM,
http://www.jiongtang.com/blog/html/s...r-smartq5.html
sudo apt-get install emesene

Plus many many other stuffs too..

SmartQ 7 videos

Cheers

07-02-2009, 10:34 PM	#1
gen Enthusiast Posts: 25 Karma: 10 Join Date: May 2009 Device: 200LX	SmartQ 7 - info Hi Everyone. Have anyone checked out this fellow's blog? (correction, its not a person, but a company) http://www.jiongtang.com/blog/ There are alot of info on the SmartQ 7(n 5 plus many others). including pictures of it being stripped. you can see the big battery behind(looks like there are lots of space for future mod). http://www.jiongtang.com/blog/html/s...rt-images.html Some pictures (from the blog, more and higher res pictures there) The battery is soldered on to the board, but it looks simple to replace. LCD Cable connector to System board 1GB Flash INAND Memory - SanDisk Audio Chip : Wolfson WM8987G - power output:13mW, DAC SNR 98dB, ADC SNR 90dB The touchscreen System Board Encryption Chip : AT88SC 0104C http://www.atmel.com/dyn/resources/p...ts/doc2044.pdf 128MB DDR RAM Wireless LAN Module USI WM-G-MR-09 Power - Idle:0.6mA, Receive:170mA, Send:265mA The Samsung S3C6410 Arm11 Processor (Seems like its pretty powerful) (info from http://www.arm.com/community/display...roductId/2644/) • ARM1176ZJF 533/667MHz • 65nm low-power process • DVFS power management • mDDR/DDR and mSDR/SDR • WVGA or higher display resolution • Hard-wired 3D GFX accelerator  – OpenGL ES 1.1/2.0 • Hard-wired multimedia (>WVGA)  – MPEG-4 SP codec  – H.264/263 BP codec  – VC-1 (WMV9) decoder  – JPEG/2D hardware  – Hardware rotator & post processor  – TV encoder • DMA • Security hardware: DES/3DES, AES, SHA-1 • High-speed connectivity  – UART  – High-speed SPI  – USB 2.0 OTG  – High-speed MMC  – MMC+/eMMC  – SDHC 4-bit  – SD cards/iNAND 2.0  – I2S MSN IM, http://www.jiongtang.com/blog/html/s...r-smartq5.html sudo apt-get install emesene Plus many many other stuffs too.. SmartQ 7 videos Cheers Last edited by gen; 07-03-2009 at 02:20 AM.