Quote:
Originally Posted by TOKE
I have new Sony PRS-505 from UK with firmware 1.2. I need polish national letters (ą, ź, ż, ę, etc.) so I used PRSCustomizer v.1.4 to do flash system.
After this I was very happy becouse I have polish letters!!!
But when I connected to USB my PRS-505 is dead: led light red - PRS-505 charge and transfer book from PC to PRS-505. But I need to hard reset becouse buttons and system not response :-(
So I upgrade my firmware to USA v.1.1 (downgrading european 505's to US firmware) and still I have this problem: PRS-505 WORK FINE UNTIL FLASH SYSTEM PRSCustomizer and after customize - connect to PC via USB.
My friend has PRS-505 from USA and version 1.1 works very fine without trouble.
HELP!!!
|
Two things to try:
1. Try the PRS-505 unbrick method in MobileRead's wiki, then try to reapply the US firmware updater.
OR
2. Bypass USB by placing the US or UK firmware image on your SD card then flash it to the Reader. If you don't have an image, post back here and I'm sure someone will PM you with one.