Quote:
Originally Posted by DaleDe
Since this is a Hanlin device you might look at the picture here: http://mybebook.com/p33/Introducing-...22)/pages.html
I suspect it will likely have the same firmware as the 6" version, no need to make it different as the buttons are the same and the screen has the same resolution 800x600 although the ppi obviously increases to 200. If there are differences it will only be artificially imposed.
Dale |
Actually
if the Pocket Pro is the same HW as the BeBook Mini, the firmware should be slightly different from the EZ Reader due to accommodating the one added button.