Thread: PW5 Yet another buggy PW5
View Single Post
Old Yesterday, 01:09 AM   #8
haertig
Wizard
haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.haertig ought to be getting tired of karma fortunes by now.
 
Posts: 2,048
Karma: 36586022
Join Date: Sep 2017
Device: PW3, Galaxy Tab A9+, Galaxy S25FE
Just so you'll know - hair dryers and vacuum cleaners are about the biggest static electricity generators on the planet. I wouldn't use one anywhere near sensitive electronics. That being said, the USB port on a Kindle doesn't really quality as "sensitive electronics", so you're probably fine.

Also, for cleaning lint out of a USB charging port, I first try a wooden toothpick, which is generally too fat. Then a plastic toothpick, which is a little thinner. Then a stiff bristle toothbrush, or a single bristle that you cut off of a toothbrush. You'll need hemostats, tweezers or some other small clamp to hold onto a single toothbrush bristle.

If you have or know someone who has an electric shaver, those usually come with a stiff bristled small brush for cleaning hairs out of them. One of those may be able to get inside your charging port and clean out any gunk in there.

Or if you're a good whittler with a knife, you could also try shaving a wooden toothpick down to a small enough profile to get it into the charging port, but be careful not to break it off in the port.

You need to pick and pull the lint out, and it's probably packed in there tighter than you-know-what after attempts to push the charging cord in tight enough to charge the Kindle. Trying to blow the gunk out with some kind of fan device is probably futile.

As a last resort, I have used a thin sewing needle to pick out really stuck lint. Yes, I know it's metal. And yes, it could theoretically short something. But I didn't have a problem the one time I had to resort to this. But note, that was on an older microUSB port on an old smartphone that I was just about to get rid of anyway. Personally, I would try a needle as a last resort on an inexpensive device like a Kindle. That's what it took to get years of packed pocket lint out of my phone's charging port. There was a lot of it packed in there, a surprising amount. The phone charged like a champ after I got all that garbage out. But do make every attempt possible using something non-conductive (non-metal) to clean out the port before trying a needle in desperation. I am not sure if devices like Kindles actually supply power to their charging port full time (when it's not in use), they may just receive power. But I don't know.
haertig is offline   Reply With Quote