Quote:
Originally Posted by doomgoatman
oh I recognize that
Code:
(bootloader) Device unlocked: false
Mine was in the same state. I am pretty sure you need the EDL cable at this point. |
I wired together an EDL cable (with a button too!) and I can enter EDL now, initial observations:
* Setting boot_b active does not work and results in a fastboot loop
* Flashing stock boot_a does not work and results in a fastboot loop
* I accidentally entered recovery for a split second while pressing down the power button and gotten out of it at the same moment, I couldn't replicate the conditions but I know that there was a completely white screen and when I pressed the power button, it displayed the AOSP recovery menu and interpreted my press as the reboot command, sending me back to fastboot
* EDL identifies Go 7 Color 2 as bitra_sdm and I'm highly confident that Go 7 B/W is also bitra_sdm
mainly because of this table, so the procedures on the tutorial should be compatible, but a full confirmation could be useful
*
DecryptBooxUpdateUpx/BooxKeys.csv suggests that Go7 and GoColor7_2 have key entries which means they probably have seperate OTA files and I should use GoColor7_2