[gleboss]

I've flashed everything except stock recovery and it doesnt boot normally(

I see that LED is blue and it stucks on Boox logo, not even flickering.

Make sure that the files that you have are the same size as mine

100% the same.

What I did step by step:

> .\edl.exe /w /s0 /c0 .\big64gfile.img
> .\edl.exe /w /s0 /c34 ..\both\main.img
> .\edl.exe /w /s-33 /c33 ..\both\backup.img
> .\edl.exe /w /pxbl_a .\output\xbl.img
> .\edl.exe /w /pxbl_b .\output\xbl.img
> .\edl.exe /w /pabl_a .\output\abl.img
> .\edl.exe /w /pabl_b .\output\abl.img
> .\edl.exe /w /pboot_a .\output\boot.img
> .\edl.exe /w /pboot_b .\output\boot.img
> .\edl.exe /w /pdtbo_a .\output\dtbo.img
> .\edl.exe /w /pdtbo_b .\output\dtbo.img
> .\edl.exe /w /pmodem_a .\output\modem.img
> .\edl.exe /w /pmodem_b .\output\modem.img
> .\edl.exe /w /pvbmeta_a .\output\vbmeta.img
> .\edl.exe /w /pvbmeta_b .\output\vbmeta.img
> .\edl.exe /w /pvbmeta_system_a .\output\vbmeta_system.img
> .\edl.exe /w /pvbmeta_system_b .\output\vbmeta_system.img
> .\edl.exe /w /psuper manmod.img
> .\edl.exe /w /psuper /s2048 .\output\odm.img
> .\edl.exe /w /psuper /s4096 .\output\product.img
> .\edl.exe /w /psuper /s1236368 .\output\system.img
> .\edl.exe /w /psuper /s7295944 .\output\system_ext.img
> .\edl.exe /w /psuper /s8239792 .\output\vendor.img
> .\edl.exe /f /pmisc
> .\edl.exe /z