Quote:
Originally Posted by Renate
But is this a case of the Windows fastboot device driver not loaded?
|
I
think I have verified fastboot works - I can put my phone in fastboot mode and see it on fastboot devices.
Quote:
Originally Posted by Renate
Does anything pop up when it goes to the Boox logo?
|
Nothing pops up, it just flashes black then the BOOX logo comes back (this is after edl /z).
Quote:
Originally Posted by Renate
You can pull the USB and see if it "bongs" when you plug it back in.
|
It bongs (connect) when I go into EDL mode. When I run edl /z, it first bongs (disconnect), and again then after the screen flashes (connect). Once it restarts, if I pull the usb cable it bongs when I unplug (disconnect), and bongs when I replug (connect).
Quote:
Originally Posted by Renate
You might have a 05c6/900e kernel crash.
If you have the update you can use a Python dumper to get xbl and abl.
You can flash them to both slots.
Try recovery, try bootloader.
|
I have just tried flashing the misc-bootloader.prc above to /misc, and the xbl.img to /xbl_a and xbl_b, and abl.img to /abl_a and /abl_b.
Same thing happens after edl /z: I can hear 1 bong for disconnect, screen flashes and goes back to BOOX logo, I can hear 1 bong for connect, but fastboot devices shows nothing.
Any other suggestions are definitely welcome
