View Single Post
Old 05-24-2025, 01:57 AM   #11
Waldy
Zealot
Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.Waldy could sell banana peel slippers to a Deveel.
 
Waldy's Avatar
 
Posts: 119
Karma: 3327
Join Date: Jun 2017
Device: Kobo,Tolino,BN,PB,Kindle,Likebook,Inkbook
Quote:
Originally Posted by diogenes3575 View Post
The connector seemed clean, the only damage to any connector I could see was maybe a small scratch on the backlight connector, but I haven't had any backlight issues. As best I can tell, I damaged the battery when removing it and there's some issue with power discharge happening at the wrong time. The fading to graininess only happens when the ereader is on, not when sleeping or off. That's a total guess though, open to any other solutions you might have.
I can send you KoboRoot.tgz with these values:
520_VSH019_HS3401_ED060KHEC1_VD1405-FOH_TC
But first save your original wf_lut.gz file and send it to me so I can try it myself first. Or so you can get your file back. You can save it using the KOReader file manager. The file is located at data/init_bin/wf_lut.gz.

Or you can get the image like this: https://www.mobileread.com/forums/sh...&postcount=576
Only for clara BW/Colour/Libra Colour I use this command:
Code:
head -c $((512 * $(cat /sys/block/mmcblk0/mmcblk0p11/start) )) /dev/mmcblk0 > /mnt/onboard/mmcblk0.rawimg
wf_lut.gz is in waveform.img.
https://ibb.co/ZzNMbD6y
Waldy is offline   Reply With Quote