Kindle Oasis 8th G0B0GD09 freezes and gets stuck on the big tree interface
Kindle Oasis 8th G0B0GD09 freezes and gets stuck on the big tree interface, USB cannot be recognized, can it be repaired by disassembling the TTL?
Hi, everyone
Kindle Oasis 8th G0B0GD09 freezes and gets stuck in the big tree interface, USB cannot be recognized, can disassembling the TTL fix it?
I used TTL to read the boot log as follows:
U-Boot 2009.08-lab126 (Aug 01 2023 - 12:47:29)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 37 C, calibration data 0x5624e05f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 24000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
Board: Whisky WAN
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 07808011633400HH
S/N: G0B0GD096352002K
I2C: ready
DRAM: 512 MB
*** Warning - bad CRC or MMC, using default environment
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0x1fff0000
POST done in 33 ms
BOOTMODE OVERRIDE: DIAGS
Battery voltage: 3678 mV
Hit any key to stop autoboot: 0
mmc1(part 0) is current device
MMC read: dev # 1, offset 0, blk count 128, blks/transfer 65535, partition # 2 ...
read 128 blocks in 2 msec: OK
MMC read: dev # 1, offset 65536, blk count 224, blks/transfer 65535, partition # 2 ...
read 224 blocks in 4 msec: OK
BIOS: 9f5f0000 S-BIOS:9f5e0000
SBIOS: v1.3 2022/09/21 16:54:52
TTBR:9f60c000
mmc_init: USE_AUTOCMD12=1 MMC_USE_WRITE_CMD23=0 MMC_USE_READ_CMD23=0
SBIOS info
storage_type: MMC
erase_size: 0
capacity: 7634944 * 512Byte
max bank = 1
Core: r847 2015/05/30 03:38:27
Platform: v1.3 2022/09/21 16:54:52
platform_bios_init(00000000)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
uboot >
|