|
Have got my Kobo Libra 2 back to life after the flashing light problem. Thought I would give a brief summary in case it helps others.
Used a very thin guitar pick (cut to shape) to slide above and below the SD card to loosen the glue holding it in. Took ages but managed to get the SD card out without damage. Followed the instructions to make a clone of the old SD card. Tried to write the clone to a new 32gb card but it said there wasn't enough room on the new card (even though both cards were 32gb). Used a 64gb card and it worked. Ignored all prompted to format the new card.
Put the new card into the slot and all appears to be working.
Thanks for the help from the forum.
|