Hi,
I rooted my Palma a while ago and then thought I reflashed the original boot partition. It seems I did not as I could not install the latest 4.0 update and it always failed.
Being a bit naiv I tried reflashing the phones partitions from an extracted payload.bin from the 4.0 release via fastboot but after a reboot I am now stuck memory dump mode.
When trying to write an image via edl I instantly get:
Code:
Qualcomm Sahara / Firehose Client V3.62 (c) B.Kerler 2018-2024.
main - Trying with no loader given ...
main - Waiting for the device
main - Device detected :)
sahara - Protocol version: 2, Version supported: 1
main - Mode detected: sahara
Device is in memory dump mode, dumping memory
Reading 64-Bit partition from 0x45ef1f40 with length of 0x6c0
OCIMEM.BIN(OCIMEM): Offset 0xc100000, Length 0x2a000, SavePref 0x1
CODERAM.BIN(RPM Code RAM region): Offset 0x4600000, Length 0x28000, SavePref 0x1
DATARAM.BIN(RPM Data RAM region): Offset 0x4690000, Length 0x14000, SavePref 0x1
MSGRAM.BIN(RPM MSG RAM region): Offset 0x45f0000, Length 0x7000, SavePref 0x1
DCC_SRAM.BIN(DCC SRAM region): Offset 0x1bed000, Length 0x3000, SavePref 0x1
DCC_CFG.BIN(DCC CFG region): Offset 0x1be2000, Length 0x1000, SavePref 0x1
CD_STRCT.BIN(CD STRCT region): Offset 0x40000000, Length 0x1f0, SavePref 0x1
CD_BTDDR.BIN(CD BTDDR region): Offset 0x400001f0, Length 0x100000, SavePref 0x1
CD_BTIMM.BIN(CD BTIMM region): Offset 0x401001f0, Length 0x180000, SavePref 0x1
CD_SHIMM.BIN(CD SHIMM region): Offset 0x402501f0, Length 0x1000, SavePref 0x1
IPA_IU.BIN(IPA IRAM region): Offset 0x5860000, Length 0x1f00, SavePref 0x1
IPA_SRAM.BIN(IPA SRAM region): Offset 0x5847000, Length 0x3000, SavePref 0x1
IPA_HRAM.BIN(IPA HRAM region): Offset 0x584a000, Length 0x1c54, SavePref 0x1
IPA_MBOX.BIN(IPA MBOX region): Offset 0x5872000, Length 0x100, SavePref 0x1
IPA_GSI.BIN(IPA GSI region): Offset 0x5806000, Length 0x1000, SavePref 0x1
IPA_SEQ.BIN(IPA SEQ region): Offset 0x585e000, Length 0x1fc, SavePref 0x1
PMIC_PON.BIN(Pmic PON stat): Offset 0x45e97000, Length 0x8, SavePref 0x1
PMON_HIS.BIN(PM PON HIST ): Offset 0x45e97008, Length 0xcc, SavePref 0x1
RST_STAT.BIN(Reset Status Region): Offset 0x45e970d4, Length 0x4, SavePref 0x1
DDR_DATA.BIN(DDR Training Data): Offset 0x45eb07e4, Length 0x3000, SavePref 0x1
PIMEM.BIN(PIMEM region): Offset 0x10000000, Length 0x700000, SavePref 0x1
FSM_STS.BIN(Rst fsm stat): Offset 0x45e970d8, Length 0x4, SavePref 0x1
FSM_CTRL.BIN(Rst fsm ctrl): Offset 0x45e970dc, Length 0x4, SavePref 0x1
DDRCS0_0.BIN( DDR CS0 part0 Memo): Offset 0x40000000, Length 0x80000000, SavePref 0x1
DDRCS1_0.BIN( DDR CS1 part0 Memo): Offset 0xc0000000, Length 0x80000000, SavePref 0x1
DDRCS1_1.BIN( DDR CS1 part1 Memo): Offset 0x140000000, Length 0x80000000, SavePref 0x1
load.cmm(CMM Script): Offset 0x45ebaf04, Length 0x7e4, SavePref 0x2
It then goes on dumping all sorts of things. Any tips on how I can recover my Palma and restore a 4.0 firmware to it, right now I can't even get into a boot loader.
Thank you so much for any help,
Paul