MobileRead Forums - View Single Post

stormporm · 01-10-2025, 06:36 AM

Hi I have a kobo libra 2 that only blinkes the white light and every now and then in the cycle flashes the screen shortly

Things I have done.
Hard reset.
flashed the sdcard with a fresh image, normal and rev E version
Tried the same thing with a new sd card.
The board type is 37NB-E70K1M+6F0 Does that mean it an F revision?

Checked if I could maybe get a uart terminal on the rx/tx pads on the pcb ( didnt work its just stable 3.3 volt coming from them. No bits) checked it with my buspirate.

Does anybody has any other ideas to try. I'm considering this ereader as junk so I'm more than willing get the soldering iron out.

01-10-2025, 06:36 AM	#1
stormporm Junior Member Posts: 3 Karma: 10 Join Date: Nov 2024 Device: kobo libra, kobo glo	Kobo libra 2 bricked Hi I have a kobo libra 2 that only blinkes the white light and every now and then in the cycle flashes the screen shortly Things I have done. Hard reset. flashed the sdcard with a fresh image, normal and rev E version Tried the same thing with a new sd card. The board type is 37NB-E70K1M+6F0 Does that mean it an F revision? Checked if I could maybe get a uart terminal on the rx/tx pads on the pcb ( didnt work its just stable 3.3 volt coming from them. No bits) checked it with my buspirate. Does anybody has any other ideas to try. I'm considering this ereader as junk so I'm more than willing get the soldering iron out.