|
@daskraken
You will most likely need to replace the built-in micro SD card. Sooner or later you will have to do it anyway.
But you can try to enter the recovery mode this way:
Connect to the charger (not to the PC!). Press and hold the power button for 10-12 seconds until the boot animation stops. Let it charge in this state for at least 30 minutes.
After that, disconnect the charger (mandatory!).
Now press and hold the bottom page turn button (bottom right). Also press and hold the power button. In general, keep both buttons pressed. After about 3 seconds, the power LED will light up and after 5-6 seconds it will go out. After it goes out, release both buttons. The recovery mode will load. Now you can connect it to the charger again and perform further actions.
|