MobileRead Forums - View Single Post

middle_tree · 07-10-2024, 05:37 PM

edl /u /i /v returns the same as edl /u /g /v.
As you said, output seems to get queued to the next one, and running edl with the custom XML returns

Code:

<log value="ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0"/>
<log value="ERROR: Failed to open the device 3 slot 0 partition 0"/>

regardless of the slot and partition I put (always says slot 0 partition 0, which seems to be from /u /i /v). Further commands just returns "bad XML".

I forgot to mention, in between edl /u /g /v and edl /r /u0 test.img /s0 /c1 /v, I had to reset, it just says "no response".

07-10-2024, 05:37 PM	#3
middle_tree Junior Member Posts: 9 Karma: 580 Join Date: Jul 2024 Device: Boox Note 3	edl /u /i /v returns the same as edl /u /g /v. As you said, output seems to get queued to the next one, and running edl with the custom XML returns Code: <log value="ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0"/> <log value="ERROR: Failed to open the device 3 slot 0 partition 0"/> regardless of the slot and partition I put (always says slot 0 partition 0, which seems to be from /u /i /v). Further commands just returns "bad XML". I forgot to mention, in between edl /u /g /v and edl /r /u0 test.img /s0 /c1 /v, I had to reset, it just says "no response".