Still refer to main guide
1.
POWER KOBO OFF NOT SLEEP MODE take back off, I used a knife to prise the back off between the crack
2. You see the sd slot? Push it left until it clicks and pop up, Take out the SD card
3. Plug it into your mac, also plug in the SD card you want to image I tried 32 gig but it didn't work so I settled with 16.
4. Use Balena Etcher -
https://etcher.balena.io/ to clone the kobo 2gig to the new 16 gig one.
5. To do the partitions, disk utility was playing up so i used Ipartition -
https://download.cnet.com/ipartition...8_4-50841.html activated with this -
https://coriolis-systems.com/downloads/iPartition.png This Activation Png was given by the vendor as stated here -
https://formulae.brew.sh/cask/ipartition
6. Use ipartition to drag the KOBOeReader Partiotion into all but about 10mb of unallocated space, press go
7. It should do some stuff and then say finished or somthing., eject it from your mac and take it out of the adaptor
8. Put it in the kobo, press the metal down and to your rightand it should stay down, Try turning it on, if the light at the top just stays blue, somthing has gone wrong, try repeating the process, and if that dosent work try an alternate sd card. If all else Fails I'm Afraid you will have to do your own Troubleshooting. OR you can just put the OG SD card back.
9. Enjoy your free space!
Disclaimer, use these links at your own risk, they are just the software that worked for me.
Also a BIG
to the maker of this guide! Now i can read manga properly!