View Single Post
Old 04-26-2009, 09:53 AM   #1
KingDani
Zealot
KingDani began at the beginning.
 
KingDani's Avatar
 
Posts: 114
Karma: 10
Join Date: Jan 2008
Location: Philly, PA
Device: iRex DR1000s,Gigabyte U60 UMPC, SmartQ v7,EKEN M001
stylus calibration problem

first , i wanted to verify something , wacom stylus is a sort of magnetic field technology right? it that's true , i should first state an interesting obeservation:
when the device is in zZz mode , if you try to wake it via stylus ,the most likely result will be the stylus become disabled. well , i observed that if you put the stylus tip , very close but not attached to the screen , the screen refreshes , and after that you can go on with writing. unlike when you do it in one step and stylus gets disabled , this , at least in my experience works perfectly , done 20 pages with no locks.
i think this has something to do with magnetic fields of screen , but i also suspect they developpers of firmware wrote a way for this in their code. any suggestions?

second , my DR has a strange behaviour , the right half of the screen is more accurate than the left , i can write whatever i want on the right part , with no glitches or deviated screw ups , but at left , i get 5-7 milimeter written material from where i originally intended. any similar experience?

PS : i have done a complete walkthrough with pictures and several pics of DR1000s exclusively for our Persian Handheld community , but i thought i could publish it here too , anyone interested? you think it could new arrivals ?
cheers
KingDani is offline   Reply With Quote