Quote:
Originally Posted by NiLuJe
That'd still be helpful, if only to check whether the PMIC change is reflected there  . |
Here's my output:
# ntx_hwconfig -s /dev/mmcblk0 2>/dev/null
HW CONFIG v3.0 @1024 secno, size=69 bytes :
[0] PCB='E60K00'
[1] KeyPad='NO_Key'
[2] AudioCodec='No'
[3] AudioAmp='No'
[4] Wifi='RTL8189'
[5] BT='No'
[6] Mobile='No'
[7] TouchCtrl='CYTT21X'
[8] TouchType='C-Type'
[9] DisplayCtrl='MX6SLL+TPS65185'
[10] DisplayPanel='6" Bottom EPD'
[11] RSensor='No'
[12] MicroP='No'
[13] Customer='9'
[14] Battery='PR-284983N-1500mA'
[15] Led='W'
[16] RamSize='512MB'
[17] IFlash='Micro SD'
[18] ExternalMem='No'
[19] RootFsType='Ext4'
[20] SysPartType='TYPE3'
[21] ProgressXHiByte=0x01
[22] ProgressXLoByte=0x68
[23] ProgressYHiByte=0x02
[24] ProgressYLoByte=0xE4
[25] ProgressCnts=0x00
[26] ContentType=0x00
[27] CPU='mx6sll'
[28] UIStyle='Customer UI'
[29] RAMType='LPDDR2'
[30] UIConfig='Normal'
[31] DisplayResolution='1448x1072'
[32] FrontLight='TABLE0'
[33] CPUFreq='NC'
[34] HallSensor='TLE4913'
[35] DisplayBusWidth='8Bits'
[36] FrontLight_Flags=BootON:OFF,TABLE1X:ON,EN_INV:ON,( null):OFF,(null):OFF,(null):OFF,(null):OFF,(null): OFF
[37] PCB_Flags=NO_KeyMatrix:ON,FPC_Touch:OFF,LOGO_LED:O FF,RD_MODE:OFF,EPD_LV:ON,EPDVDD_STDALONE:OFF,HP_DE TECT:OFF,ISD_1V8:OFF
[38] FrontLight_LEDrv='LM3630'
[39] VCOM_10mV_HiByte=0x00
[40] VCOM_10mV_LoByte=0x00
[41] PCB_REV=0x00
[42] PCB_LVL='B'
[43] HOME_LED_PWM='No'
[44] PMIC='RC5T619'
[45] FL_PWM='LM3630'
[46] RTC='RC5T619'
[47] BootOpt=ESD:OFF
[48] Touch2Ctrl='No'
[49] Touch2Type='No'
[50] GPS='No'
[51] FM='No'
[52] RSensor2='No'
[53] LightSensor='No'
[54] TPFWIDByte0=0x00
[55] TPFWIDByte1=0x00
[56] TPFWIDByte2=0x00
[57] TPFWIDByte3=0x00
[58] TPFWIDByte4=0x00
[59] TPFWIDByte5=0x00
[60] TPFWIDByte6=0x00
[61] TPFWIDByte7=0x00
[62] GPU='NC'
[63] PCB_Flags2=eMMC@SD1:OFF,WiFi@SD2:OFF,eMMC@SD2:OFF, USB_TYPEC:OFF,Cilix:OFF,VDDR_INC:OFF,(null):OFF,(n ull):OFF
[64] EPD_Flags=NO_VDD_CTRL:OFF,LP_PANEL:OFF,ACEP:OFF,CF A:OFF,XON:OFF,(null):OFF,(null):OFF,(null):OFF
[65] LAN='No'
[66] MobileIF='NC'
[67] PIR='No'
[68] PanelLaminationSrc='NC'
[69] FL_CHNS='[+] 0x00'
[70] TTS='[+] 0x00'
[71] Test_Flags='[+] 0x00'
[72] EPD_CFA_REV='[+] 0x00'
[73] PanelModel='[+] 0x00'
[74] ACEPPWR='[+] 0x00'
[75] BootPartNo='[+] 0x00'