MobileRead Forums - View Single Post - PRS-T2 How to boot PRS-T2 from SD card?

jindraaa · 12-03-2023, 10:10 AM

Update:

I switched to getting the PRS-T1 booting from SD. That worked totally fine with the extracted new_boot.bin flashed to the internal memory and I used the DD image 1.07 of the SD card and created. So that works fine for the PRS-T1.

I checked with hexedit and it seems the extracted boot.bin are the same for the T1 and T2 so it must be the SD card setup causing not boot? Is there some difference in referencing the SD slot since the T2 doesn't have a headphone jack?

I tried reimaging the individual partitions of the SD with extracted ones from the T2 but also didn't work.

The T2 doesn't seem to have nearly the same problems with the eMMC as the T1 so I guess it's fine to leave it.

12-03-2023, 10:10 AM	#2
jindraaa Junior Member Posts: 2 Karma: 10 Join Date: Dec 2023 Device: Sony PRS T1&T2	Update: I switched to getting the PRS-T1 booting from SD. That worked totally fine with the extracted new_boot.bin flashed to the internal memory and I used the DD image 1.07 of the SD card and created. So that works fine for the PRS-T1. I checked with hexedit and it seems the extracted boot.bin are the same for the T1 and T2 so it must be the SD card setup causing not boot? Is there some difference in referencing the SD slot since the T2 doesn't have a headphone jack? I tried reimaging the individual partitions of the SD with extracted ones from the T2 but also didn't work. The T2 doesn't seem to have nearly the same problems with the eMMC as the T1 so I guess it's fine to leave it.